Principio de funcionamiento de la máquina laminadora de tubos.

El divisor hidráulico se refiere a la transmisión hidráulica del rodillo superior, y la transmisión hidráulica sin fluido hidráulico está permitida por el aceite hidráulico en el cilindro hidráulico; el rodillo inferior es impulsado por rotación, y el engranaje es acoplado por el engranaje de salida del reductor, proporcionando torque para la placa del rodillo. Hay un rodillo debajo del rodillo inferior y se puede ajustar. El rodillo superior tiene forma de tambor y se mejora la linealidad del artículo, lo que es adecuado para una variedad de formas de sección transversal.

The basic principles and structural nature of various inductive low-voltage electrical electricity of the roll plane are also. The main characteristics of electrically isolated are incandescent, high internal temperature, and have a relatively high amount of current, with conductivity. From a structural point of view, the low-voltage electrical system consists of two main components, i.e., induction components and execution components are electrical isolation in the process of winding machine systems. When the contact point is just open, the interval between contact points is small, the electric field strength is huge, high heat and strong electric field, and the electron-element humerus speed fitness exercise collide with mineral acid, the actual effect of mineral acid factors, contact points Magnetic density forms a plurality of negative gas conductivity of a plurality of charged particles, and there is therefore in the power circuit, we should listen to the appropriate method to smooth the orphans.

Easy damage to the roll machine:

1. First, it is easy to wear the electrical system. It will seriously affect the work efficiency of the rounder as a core accessory of the roller operation.

Roll

2. Second, the main fittings of the roll transfer, such as turbines, screws, etc. also very prone to damage. In order to avoid damage of these components, we can add a certain amount of butter to reduce the wear between the accessories.

3. Furthermore, it is prone to failure of the failure is the bearing of the roll, especially the lower roll and firm seat, which is prone to friction, although the wear resistance of this component is very good, but under the working pressure of the long time The bearing part of the roll is still impaired.