How to solve the problem of saw blade loss of metal circular sawing machine

It is an inevitable problem that the saw blade is worn out during the long-term operation of the machine. It will increase the processing cost of the enterprise, reduce the production efficiency of the enterprise, and affect the quality of the workpiece. So how do we solve this problem?

1. Installation

The saw blade of the metal circular saw must be installed in strict accordance with the relevant instructions to avoid loosening of the screws.

Before the machine runs, check whether the saw blade is installed correctly and whether there is iron filings on the saw blade. Keep the saw blade clean.

2. Knife guard block

Check whether the blade guard is installed correctly, which will affect the use of the saw blade.

3. Rotational speed and feed speed when the machine is operating

If the speed and feed speed of the machine are too fast, it will increase the consumption of the saw blade. Excessive wear will have an irreparable impact on the saw blade; these parameters cannot be adjusted without authorization due to production problems.

4. Saw blade usage time

Ensure that the saw blade is used for no more than 20 hours a day, which helps maintain the stability of the machine and prolong the use time of the saw blade

5. Cutting material

Before cutting the material, check whether there are iron nails and other hard objects on the pipe, and clean it up in time, otherwise it will cause irreparable damage to the saw blade.